LawnMaster NPTGSP2617A Review No Pull 26cc 17 Inch Grass Trimmer for Routine Yard Work
Why This Product Is Worth a Look
Starting a gas trimmer can be frustrating, especially when a pull cord requires several hard tugs. The LawnMaster No-Pull NPTGSP2617A addresses that problem with a battery-powered push-button starter while retaining the cutting power and runtime of a 26cc gas engine. It is an interesting option for demanding residential trimming, although its weight and added mechanical complexity deserve consideration.
Product Overview
The LawnMaster No-Pull 26cc 2 Cycle Engine 17-inch Grass Trimmer, model NPTGSP2617A, is a gas-powered straight-shaft string trimmer designed for tall grass, dense weeds, fence lines, ditches, and other heavier residential jobs.
Its 26cc two-cycle engine drives a dual-line bump-feed head loaded with 0.095-inch line. The 17-inch cutting width covers a relatively large area with each pass. Rather than relying on a conventional recoil cord, the engine starts through an electric starter powered by an included removable 7.2-volt lithium-ion battery.
The trimmer also has a split shaft that accepts compatible multi-tool attachments. This makes it relevant to homeowners who want one gas powerhead for trimming and potentially other jobs such as edging, hedge trimming, or pole sawing. Compatibility should always be confirmed before purchasing a separate attachment.
Listed product dimensions are 42 by 10 by 5 inches, and the listed weight is 18.9 pounds. The package includes the powerhead, straight-shaft trimmer attachment, starter battery, charger, adjustable assist handle, debris guard, maintenance tools, and manuals.
Design, Build, and Everyday Feel
The LawnMaster has a practical, industrial appearance rather than a particularly sleek or lightweight design. A compact engine housing sits at the rear, while the straight aluminum drive tube places the cutting head well ahead of the operator. High-impact plastic is used around the engine, starter assembly, and debris shield.
The rear grip groups the throttle trigger, safety lockout, stop switch, and electric-start button in one accessible area. The starter battery docks near the engine instead of adding weight near the cutting head. A forward assist handle slides along the shaft and rotates through 360 degrees, allowing the grip position to be adjusted for reach and cutting angle.
The split-shaft connection makes transportation and storage easier than it would be with a fixed shaft. Its aluminum coupler and large tightening knob are designed to create a firm connection between the powerhead and attachment.
Weight is the main ergonomic concern. At a listed 18.9 pounds before considering the practical effect of carrying fuel and managing a spinning head, this is not a light trimmer. The adjustable handle may improve balance, but the lack of a dedicated shoulder-strap mounting point means the operator must support the tool primarily with the arms and hands.
Key Features
The first major feature is the No-Pull electric starting system. A removable 7.2-volt lithium-ion battery powers a starter motor, allowing the engine to be started by pressing a button instead of pulling a recoil cord. LawnMaster states that the battery can support up to 250 starts per charge. Actual results can vary with temperature, fuel condition, and the time required for each starting attempt. The system reduces pulling effort, but it also adds a battery, starter gears, and other parts that may eventually require attention.
The second feature is the 26cc two-cycle engine. It provides the torque needed to spin heavier 0.095-inch line through tall grass and dense weeds. The variable-speed throttle lets the operator reduce speed around plants, siding, and other delicate surfaces. This engine still requires a correctly prepared 40-to-1 gasoline and two-cycle oil mixture, along with normal maintenance involving the air filter, spark plug, fuel system, and carburetor.
The third feature is the 17-inch dual-line cutting head. Its wide cutting path can make faster progress along large fence lines and overgrown property edges. Additional line is released by tapping the bump cap on firm ground while the head is spinning, and the guard blade trims it to the proper length. The rapid-reload design allows line to be installed without fully disassembling the spool, although uneven winding or an incorrect line size may cause binding.
The fourth feature is the attachment-ready split shaft. The shaft separates near the center for easier transport and accepts compatible multi-tool attachments. This can expand the powerhead beyond normal trimming duties and reduce the need for several separate engines. However, a universal-style connection does not guarantee that every attachment from every brand will fit, so the shaft type and drive connection should be checked carefully.
Watch the Video Review
What It May Be Like to Use
Based on the available product information, starting the LawnMaster is easier physically than starting a traditional pull-cord trimmer, but it is not completely automatic. The typical cold-start process still involves pressing the primer bulb five to ten times, setting the choke, and holding the electric-start button for a few seconds. Once the engine fires, the choke is gradually moved toward the run position while the engine warms for roughly 30 to 60 seconds.
The included 8.4-volt wall charger is reported to recharge the starter battery in approximately four to six hours. Because the battery only operates the starter, the cutting head continues to receive its power from the gasoline engine.
The translucent fuel tank holds 400 milliliters, or about 0.105 gallon. A full tank may provide roughly 35 to 45 minutes of active trimming, depending on throttle use, vegetation density, and operating conditions. Fresh fuel and an accurate 40-to-1 mixture remain important even though the starting process is electric.
In typical yard use, the straight shaft should provide good reach beneath shrubs, raised decks, and fence rails. The 26cc engine and thick line are intended for vegetation that may challenge a small, lightweight trimmer. Bump feeding is straightforward when the spool is wound evenly.
Edging along a driveway may feel less natural. The straight shaft must be rotated and held at an angle, which can place additional strain on the wrists and forearms. Adjusting the forward handle can help, but frequent changes may be necessary when switching between horizontal trimming and vertical edging.
The tool will also produce the noise, heat, vibration, and exhaust expected from a two-cycle gas engine. The anti-vibration handle may reduce some movement reaching the hands, but it cannot make the engine feel like a quiet battery-only tool.
What Works Well
Push-button starting is the clearest advantage. It removes the repeated shoulder and arm motion associated with a recoil cord, which may be especially valuable when the engine must be stopped and restarted several times.
The 26cc engine is suited to demanding residential work. Its combination of gas power, variable throttle control, and 0.095-inch dual line should be capable of handling tall grass and substantial weed growth.
The 17-inch cutting width covers more ground per sweep than a narrow trimming head. This can be helpful around large yards, drainage areas, and long property boundaries.
The adjustable assist handle offers useful flexibility. It can slide forward or backward and rotate fully around the shaft to accommodate different working angles and operator preferences.
The split-shaft design improves storage and transportation while creating the option to use compatible attachments. This gives the powerhead more versatility than a trimmer with a permanently fixed lower shaft.
Things to Consider
The listed 18.9-pound weight is substantial. Longer jobs, slopes, and vertical edging may cause faster arm, shoulder, or lower-back fatigue than a lighter trimmer would.
There is no dedicated factory shoulder-harness loop or included support harness. The adjustable front handle helps with balance, but it does not transfer the load to the operator’s torso.
Vertical storage may cause fuel to seep through the vented cap when gasoline remains in the tank. Horizontal storage is the safer practical arrangement described in the available information. Draining the tank is sensible before extended storage.
The electric starter adds convenience but also introduces additional wear points. Reports involving starter pawls or drive gears suggest that long-term starter condition is worth monitoring. If the electric-start mechanism becomes inoperative, the absence of a normal pull cord may prevent the engine from being started until repairs are made.
The rapid-reload spool is convenient but can be sensitive to line size and winding tension. Using the specified 0.095-inch line and keeping both sides evenly wound should reduce jams.
This is still a two-cycle gas tool. Anyone seeking quiet operation, low weight, no exhaust, and minimal maintenance may be better served by a cordless electric trimmer. The manufacturer also states that No-Pull models are not for sale in California.
Who Is This Product For?
The LawnMaster NPTGSP2617A is worth considering for homeowners who regularly deal with thick weeds, tall grass, ditches, fence lines, or rough property edges. It may also appeal to people who prefer gas-engine runtime and power but want to avoid the physical effort of repeatedly pulling a starter cord.
Its attachment-ready shaft can make sense for users interested in building a multi-tool yard system around one powerhead. Older operators or anyone with shoulder discomfort may appreciate the push-button start, provided the tool’s overall weight remains manageable.
It may not be suitable for people who need a lightweight trimmer for long sessions, have limited arm or back strength, or want a simple machine with minimal maintenance. It is also less attractive for small urban yards where noise, exhaust, storage space, and fuel handling are major concerns.
Helpful Tips Before You Buy
Confirm that an 18.9-pound gas trimmer will be comfortable to carry. If possible, compare its weight with tools you have previously used and consider how long a typical trimming session lasts.
Plan for horizontal storage, particularly when fuel remains in the tank. The split shaft can reduce the amount of shelf space required. For seasonal storage, follow the manual’s fuel-management instructions rather than leaving old mixed gasoline in the system.
Use fresh unleaded gasoline and two-cycle oil at the specified 40-to-1 ratio. An incorrect mixture can contribute to smoke, deposits, poor performance, or engine damage.
Charge the starter battery before the first job and store it according to the manufacturer’s instructions. Avoid exposing the battery and charger to excessive heat, moisture, or freezing conditions.
Use 0.095-inch trimmer line and wind it with even tension. Incorrect line or uneven winding can interfere with bump feeding.
Verify attachment compatibility before buying an edger, pole saw, or hedge-trimmer accessory. A similar-looking split-shaft connector does not always guarantee a proper fit.
Wear eye and hearing protection, gloves, long pants, and closed-toe footwear. Keep people and pets away from the working area because the 17-inch head can throw stones, sticks, and other debris. Allow the engine and muffler to cool before refueling or storing the tool.
Common Questions
Does this trimmer have a pull cord?
No. The NPTGSP2617A uses a battery-powered push-button starter rather than a conventional recoil cord.
How long does the starter battery take to charge?
The included charger is reported to require approximately four to six hours for a full charge. LawnMaster states that the battery can deliver up to 250 starts per charge, although real-world results may vary.
What fuel mixture does the engine require?
The 26cc two-cycle engine requires a 40-to-1 mixture of unleaded gasoline and two-cycle engine oil.
What size line does the cutting head use?
The dual-line bump-feed head is designed for 0.095-inch trimmer line and provides a 17-inch cutting width.
Can other yard-tool attachments be installed?
The split shaft accepts compatible multi-tool attachments, but buyers should verify the connector and drive compatibility for each specific attachment.
Is it a good choice for long trimming sessions?
It has suitable cutting power, but its listed 18.9-pound weight and lack of a dedicated shoulder-harness mount may make long sessions tiring.
Final Thoughts
The LawnMaster No-Pull NPTGSP2617A combines the cutting authority and runtime of a 26cc gas trimmer with the convenience of push-button starting. Its 17-inch cutting path, heavy 0.095-inch line, adjustable assist handle, and attachment-ready split shaft make it a capable option for tougher residential vegetation.
The trade-offs are equally important. It is heavy, does not provide a proper shoulder-harness connection, may need to be stored horizontally, and has a more complicated starting system than a basic recoil-start engine. It also retains the fuel mixing, noise, exhaust, and maintenance associated with a two-cycle machine.
Overall, this model makes the most sense for someone who needs substantial gas-powered cutting performance and strongly prefers not to pull a starter cord. For shorter demanding jobs, its convenience and power may outweigh its bulk. For extended trimming or light lawn maintenance, a lighter cordless model may be the more comfortable choice.
Post a Comment
0 Comments