EPLO Smart Toilet E16 Review One Piece Bidet with Foam Shield and Auto Flush Features
Why This Product Is Worth a Look
The EPLO Smart Toilet E16 is designed for households that want to replace a conventional toilet with an integrated bidet system. Its combination of pump-assisted flushing, a foam shield, automatic controls, heated washing, and warm-air drying makes it technically more capable than a standard toilet or a basic add-on bidet seat. Those conveniences also introduce installation, maintenance, noise, and electrical requirements that should be evaluated before purchase.
Product Overview
The EPLO Smart Toilet, One Piece Bidet with Foam Shield, Auto Flush E16, model EP-E16, is a floor-mounted, one-piece smart toilet with an elongated bowl. It combines the toilet, bidet, heated seat, dryer, deodorization system, sensors, and electronic controls in one fixture.
The E16 is intended for a standard 12-inch rough-in and requires a nearby 110-volt, GFCI-protected electrical outlet. Its listed dimensions are 27.2 inches deep, 16.14 inches wide, and 19 inches high, although some documentation may show slightly different measurements across revisions. The listed weight is approximately 83 pounds.
The flushing architecture uses a built-in tank, booster pump, and siphonic jet system. It provides a 1.6-gallon full flush and a 1.1-gallon reduced flush. Bidet functions include rear wash, feminine wash, adjustable water pressure, adjustable nozzle position, oscillation, and nozzle self-cleaning. Comfort features include an adjustable heated seat, instant warm water, warm-air drying, deodorization, a night light, and a wireless remote.
This model is most relevant to homeowners replacing an entire toilet rather than shoppers who only need a bidet attachment. EPLO lists IAPMO, CEC, CUPC, and EGS certifications, along with a one-year manufacturer warranty.
Design, Build, and Everyday Feel
The E16 has a streamlined, tankless-looking exterior, although a flushing tank is integrated inside the housing. Its skirted base conceals the external trapway, creating a cleaner appearance and removing some of the curved surfaces that are difficult to wipe on a traditional toilet.
The main bowl is made from glazed ceramic, while the seat, lid, and related housing components use polypropylene. It should not be considered an all-ceramic unit. The elongated seat is intended to provide more sitting room than a round bowl, but the overall footprint is still similar to that of a full-size residential toilet. Measuring the bathroom is important, especially in a compact room.
The lid, seat, remote-controlled functions, display, sensors, and side control are integrated without making the exterior look overly mechanical. A built-in LED night light provides low-level illumination around the bowl, while the status display communicates temperature and operating information.
At more than 80 pounds, the E16 should feel stable after correct installation. That weight is a practical disadvantage while positioning the toilet over the floor connection. The fully skirted base also limits direct visibility of the flange and seal during alignment, so installation is likely easier with two people.
Key Features
Pump-Assisted Dual Flushing
The E16 combines an internal tank with an electric booster pump and siphonic flushing action. This design is intended to produce more consistent clearing force, particularly where household water pressure may be less reliable. Users can select a 1.6-gallon full flush or a 1.1-gallon reduced flush. The tradeoff is that the pump creates a more noticeable mechanical sound than a quiet gravity-fed toilet.
Foam Shield
The foam shield creates a layer over the bowl water before use. Its purpose is to reduce splash, help contain odors, and make it more difficult for waste to stick to the bowl surface. It may reduce cleanup, but it does not eliminate the need for routine bowl cleaning. Buyers should check the manual for compatible foam solution, filling procedures, and ongoing maintenance requirements.
Adjustable Bidet Washing
Rear and feminine wash modes are supported, with controls for water temperature, pressure, and nozzle position. Oscillating and pulsating operation can broaden or vary the spray pattern, while the stainless-steel wand includes a self-cleaning cycle. These adjustments make the system more adaptable to different users, although the nozzle area will still require periodic manual cleaning.
Instant Warm Water and Heated Comfort
A ceramic heating module warms wash water on demand rather than relying on a small reservoir of stored hot water. Available information identifies four water settings: room temperature, 34 degrees Celsius, 37 degrees Celsius, and 40 degrees Celsius. The seat offers the same listed temperature levels. Warm-air drying is available at room temperature, 40 degrees Celsius, 45 degrees Celsius, and 50 degrees Celsius. The dryer uses relatively gentle airflow, so complete drying may take several minutes.
Hands-Free Controls and Backup Flushing
The E16 supports automatic flushing after the user leaves the seat, foot-sensor operation, remote control, and a side-mounted manual control. Available documentation also describes automatic lid operation and an external 9-volt battery backup for flushing during a power outage. Backup power is intended to preserve flushing capability, not to continue operating the heated seat, warm wash, or dryer.
Watch the Video Review
What It May Be Like to Use
Based on the available product information, the daily routine can be largely hands-free. The lid may open through proximity detection, while the foot sensor offers another way to control the lid, seat, or flush without reaching for a button. After use, the toilet can flush when the occupancy sensor detects that the user has left.
When someone sits down, the bowl pre-wetting function can apply a thin water film to the ceramic surface. The foam shield addresses splash and odor control through a separate foam layer. Together, these systems may help reduce residue, although results will depend on settings, maintenance, and the condition of the bowl.
Washing is managed primarily through the wireless remote. A user can select the wash mode, adjust the nozzle position, begin with lower pressure, and then increase pressure if needed. The instant-heating system should avoid the limited warm-water capacity associated with reservoir-style bidets.
The heated seat may be especially useful in a cold bathroom, while the night light reduces the need to turn on bright overhead lighting. The dryer can reduce paper use, but users who expect rapid drying may still prefer a small amount of toilet paper.
Automatic operation may require some adjustment. In a narrow bathroom, a proximity sensor could respond when someone simply walks past the toilet. If that happens, disabling automatic lid opening and relying on the foot sensor may provide more predictable control.
What Works Well
The integrated design places washing, drying, deodorization, and flushing functions in one coordinated fixture rather than combining a separate toilet and bidet seat.
The booster pump provides active assistance to the siphonic flush, which may be valuable in homes where conventional flushing has been inconsistent.
The dual-flush system allows users to choose between 1.1 and 1.6 gallons instead of using the maximum volume for every flush.
The foam shield and bowl pre-wetting systems address splash, odor, and surface adhesion before waste reaches dry porcelain.
Instant water heating supports continuous warm washing without waiting for a storage tank to reheat.
Multiple control methods provide useful redundancy. Automatic flushing, the foot sensor, wireless remote, and side control prevent the toilet from depending on a single interface.
The skirted exterior has fewer exposed plumbing contours, making routine exterior cleaning more straightforward.
Things to Consider
Installation is more involved than replacing a basic gravity toilet. The E16 requires a compatible 12-inch rough-in, a correct water connection, and a grounded 110-volt GFCI outlet near the fixture.
The approximately 83-pound ceramic body can be difficult for one person to position safely. Professional installation or at least a second person for lifting and alignment would be sensible.
The pump-assisted flush is expected to produce an audible motor hum. Buyers placing the toilet near a bedroom may want to consider the noise difference compared with a gravity-fed model.
Warm-air drying is not immediate. Available usage information indicates that full drying may require several minutes.
Automatic lid sensing may be too responsive in a small or high-traffic bathroom. The foot sensor or manual controls may be preferable in that situation.
The foam shield introduces another consumable or maintenance task. The available product summary does not fully explain solution compatibility or refill frequency, so those details should be confirmed in the current manual.
Electrical components, sensors, a pump, heaters, and a motorized wand create more potential service points than a conventional toilet. The listed manufacturer warranty is one year, making parts availability and post-warranty support relevant considerations.
Who Is This Product For?
The EPLO E16 is worth considering for homeowners completing a bathroom renovation or replacing an entire toilet. It is particularly relevant for users who want warm-water bidet washing, a heated seat, touch-free flushing, odor management, and stronger pump-assisted flushing in one unit.
It may also suit households focused on accessibility, since the automatic flush, remote, and foot sensor reduce bending and contact with the fixture. Individual mobility needs should still be reviewed carefully because this is not presented as a substitute for dedicated accessibility equipment.
The E16 may be less suitable for renters, bathrooms without nearby electrical access, nonstandard rough-ins, or anyone who prefers the mechanical simplicity and quieter operation of a gravity toilet. It may also be excessive for someone who only wants basic bidet washing, since a bidet seat can be simpler to install and replace.
Helpful Tips Before You Buy
Measure from the finished wall, not the baseboard, to the center of the floor drain bolts to verify the 12-inch rough-in.
Confirm the complete product dimensions against the current manual because dimensions may differ slightly between documentation revisions.
Plan for a dedicated or otherwise properly rated 110-volt GFCI-protected outlet. Use a qualified electrician if an outlet must be installed.
Arrange help when moving and positioning the toilet. Avoid lifting the unit by its seat, lid, or rear electronic housing.
Check water-supply compatibility and verify whether the included 1/2-inch angle valve matches the existing plumbing.
Read the foam-shield instructions before operation. Confirm which solution is approved and how the reservoir should be cleaned or refilled.
Install and test the specified 9-volt backup battery before an outage occurs. Remember that battery backup is described primarily for flushing.
Start bidet use with low water pressure and moderate temperature. Adjust nozzle position before increasing spray strength.
Review warranty coverage, service procedures, and replacement-part availability because the toilet contains several powered components.
Common Questions
Does the EPLO E16 need electricity?
Yes. Its pump, water heater, heated seat, dryer, sensors, display, and other smart functions require a nearby 110-volt GFCI-protected outlet.
Can it flush during a power outage?
Available documentation describes an external 9-volt battery backup that maintains flushing. Heated washing, seat heating, and drying should not be expected to operate from that backup.
Does it require strong household water pressure?
The internal tank and booster pump are intended to improve flushing consistency. The water supply must still meet the installation requirements for filling and bidet operation.
Is the foam shield the same as bowl pre-wetting?
No. Pre-wetting applies water to the bowl surface, while the foam shield creates a foam layer intended to reduce splash, odor, and sticking.
Does the dryer completely replace toilet paper?
It can reduce paper use, but complete drying may take several minutes. Some users may prefer a small amount of paper when faster drying is desired.
Can it be installed as a simple toilet-seat upgrade?
No. The E16 is a complete one-piece toilet and bidet system. Installing it requires removing the existing toilet and connecting the new fixture to the floor drain, water supply, and electrical outlet.
Final Thoughts
The EPLO Smart Toilet E16 combines a strong set of hygiene and comfort functions with a pump-assisted dual-flush system. Its foam shield, bowl pre-wetting, instant warm water, adjustable bidet wash, heated seat, deodorization, and hands-free controls address practical daily concerns rather than adding app-based features that may not be necessary.
Its main compromises are equally practical. The toilet is heavy, needs suitable plumbing and GFCI-protected electrical access, produces pump noise during flushing, and may require patience during warm-air drying. The foam system also adds a maintenance item that buyers should understand before installation.
For a homeowner replacing an entire toilet and prepared for the electrical and installation requirements, the E16 offers a technically comprehensive alternative to combining a conventional toilet with a separate bidet seat. It appears best suited to buyers who value integrated washing, touch-free controls, and pump-supported flushing enough to accept greater complexity than a standard toilet.
Post a Comment
0 Comments